"Floodfree" was designed because of the unreliability of some sump pump floats or diaphragm switches. The number one cause of basement flooding is due to float control failure. Floats gets stuck, float switches fail, rubber gets stiff and dry rotted. All of these inhibit operation.

"Floodfree" can replace your existing float, no need to change out the pump. The pumps rarely go bad, so all you need to do is remove the float or tie the float in the "on" position.

"Floodfree" Lets you determine the high and low water levels; you choose the amount of water to let into the sump (high water level) as well as the amount of water you let out (low level).

"Floodfree" is not affected by pump movement, water turbulence or foreign material that inhibit float control operation.

"Floodfree" is rated at 100 - 130 vac 15 amps with a 1 million cycle rating compared to float or diaphram switches with only 10,000 operating cycles rated at 10 amps.

"Floodfree" has an 80-decibel alarm to sound in emergencies with a battery backup if power is lost, unlike float control pumps which do not have alarms.

"Floodfree's" sensor wires don't sit in the water, so they are not susceptible to corrosion or calcium and debris which leads to malfunction in many more expensive electronic controls.

"Floodfree" is easy to install. No tools are required.

"Floodfree" plugs into a standard wall outlet.